Drive Belt Replacement [Z6]; Drive Belt Auto Tensioner Inspection [Z6] - Mazda 3 Workshop Manual

Mazda 3 Workshop Manual – Engine + Wiring Diagrams + Diagnostic Trouble Codes
• If it exceeds the limit, replace the drive belt. (See
3. Install the under cover and splash shield (RH).

DRIVE BELT REPLACEMENT [Z6]

1. Remove the under cover and splash shield (RH).
2. Rotate the drive belt auto tensioner in the direction shown in the figure and remove the drive belt.
3. Install the new drive belt.
4. Verify that the drive belt auto tensioner indicator mark does not exceed the limit. (See
INSPECTION [Z6].)
5. Install the under cover and splash shield (RH).

DRIVE BELT AUTO TENSIONER INSPECTION [Z6]

1. Remove the drive belt. (See
2. Verify that the drive belt auto tensioner moves smoothly in the operational direction.
Downloaded from
DRIVE BELT REPLACEMENT
https://carmanualshub.com/
DRIVE BELT REPLACEMENT
[Z6].)
- automotive repair manuals website
[Z6].)
B3E011015800W03
DRIVE BELT
B3E011015800W04