Intake Manifold Removal (4.0L); Intake Manifold Installation (4.0L) - Mazda B-Series 1997 Workshop Manual

F3
INTAKE AIR SYSTEM
Removal Note
Fuel distributor
Refer to page F3-13 for removal procedures.
6BUOF3-003
I
EXAMINE CLOSELY FOR EROSION,
CORROSION, OR PITTING
1
APPLY SILICON
SEALER
Intake manifold
1. Remove the ignition coil and the mounting bracket.
2. Remove the cylinder head covers. (Refer to Section 83.)
3. Remove the intake manifold and discard the gasket.
Installation Note
Intake manifold
1. Apply the appropriate sealant to the intersection of the
cylinder block and the cylinder head at the four corners as
shown.
2. Install the new intake manifold gasket.
3. Apply the appropriate sealant to the intersection of the
cylinder block and cylinder head at the four corners as in
step 1.