Exhaust System Components Removal/Installation/Inspection (3.0L); Rear Bracket And Insulator Assembly Removal (3.0L) - Mazda B-Series 1997 Workshop Manual

Table of Contents

Advertisement

EXHAUST SYSTEM
F2
EXHAUST SYSTEM
COMPONENTS
Removal 1 Inspection 1 lnstallation
1. Remove in the order shown in the figure, referring to Removal Note.
2. Check all parts and repair or replace, if necessary.
3.
Install in the reverse order for removal, referring to lnstallation Note.
/
NOTE: DISCONNECT
I
V
34-46 13.5-4.6,~~-33)
H02 SENSOR
CONNECTORS
TO REMOVE FRONT PIPE
I
I
dF1878-A
6BUOF2-009
1. Silencer
5. Rear bracket and insulator assembly
Inspect for deterioration and restriction
Removal Note
................................
below
2. Three way catalytic converter
Installation Note
...................
page F2-12
Inspect for deterioration and restriction
6. Center bracket and insulator assembly
3. Front pipe assembly
7. Front bracket and insulator assembly
Inspect for deterioration and cracks
8.
Silencer heat shield
4. Exhaust manifold
Removal Note ...................... page F2-12
Inspect for deterioration and cracks
Installation Note ................... page F2-12
Removal Note
.....................
page F2-12
Installation Note
..................
page F2-12
Removal Note
Rear bracket and insulator assembly
1. Remove silencer.
2. Remove the rivet which attaches the bracket and insulator
assembly to the frame.
4BUOF2-145

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents