ASSEMBLY
Crankshaft position sensor
1. Install the crankshaft position sensor
2. Tighten the screws.
Tightening torque:
9-12
N.m (0.9-1.2
kgf-m, 7.0--8.8 ft.lbf)
Water pump
1. Apply sealant to the mating surface of the water pump.
2.
Install the water pump and water pump bolts.
3. Tighten the water pump bolts.
Tightening torque:
8.5-12
N.m (0.83-1 -24 kgf-m, 6-9
ft.lbf)
4. lnstall the water pump pulley.
4BUOB3-148
Baffle
1.
lnstall the baffle.
2.
Tighten the nuts.
Tightening torque:
17-21
N-m (1 .&-2.0 kgfsm, 13-15
ft-lbf)
Oil pump
Note
Fill the oil pump with oil and rotate the oil pump
shaft to prime the oil pump.
1. lnstall the oil pump.
2. Tighten the screws.
Tightening torque:
17-21
N.m (1.8-2.0
kgf-m, 13-1 5 ft.lbf}