Radiator Inspection (3.0L); Radiator Hoses Inspection (3.0L) - Mazda B-Series 1997 Workshop Manual

RADIATOR
INSPECTION
Radiator
Check for the following and repair or replace as neces-
sary:
1. Cracks, damage and water leakage.
2. Bent fins (repair with a screwdriver).
3. Distorted and bent radiator inlet and outlet.
6BUOE2-001
Installation Note
Transmission Cooler Lines
Note
When installing a new radial:or, transfer the
transmission cooler line fittings from the old
radiator and install them on the new radiator.
5BUOE2-005
Radiator hose, upper
Position the hose on the radiator neckso that the stripe on
the hose is at the 12 o'clock position.
4BUOE2-017
Radiator hose, lower
1. Position the hose on the radiator with the stripe on the
hose at the 6 o'clock position.
2. Ensure that the bypass hose on lower radiator hose is
routed so that it adequately clears the water pump pulley.
3. Reinstall the hose clamps.
Steps After Installation
1. Fill the radiator with the specified amount and type of engine coolant. (Refer to page E2-5.)
2. Connect the negative battery cable.
3. Start the engine and check for leaks.
4. Bleed the cooling system. (Refer to page E2-6.)