Injector/Pressure Regulator Removal/Installation (3.0L) - Mazda B-Series 1997 Workshop Manual

FUEL SYSTEM
INJECTOR I PRESSURE REGULATOR
Removal I Installation
Warning
Before performing the following operation, release the fuel pressure from the fuel
system to reduce the possibility of injury or fire. (Refer to page F2-8.)
When removing the fuel system components, keep sparks, cigarettes and open flames
away from the fuel area.
Use new O-rings.
1.
Remove upper intake manifold / throttle body assembly. (Refer to page F2-2.)
2. Remove in the order shown in the figure, referring to Removal Note.
3. Install in the reverse order of rernoval, referring to Installation Note.
O-RING,
-
REPLACE
I
MF1898-A
I
6BUOF2-008
1. Fuel injector connector
5. Pressure regulator
2. Vacuum hose
Removal Note . . . . . . . . . . . . page F2-10
3. Fuel rail
Installation Note . . . . .
.
.
.
. . page F2-10
4.
Injector