Ignition Coil (3.0L) - Mazda B-Series 1997 Workshop Manual

ELECTRONIC IGNITION SYSTEM
G
Ignition coil (3.OL)
1. Position the ignition coil on the upper intake manifold/
throttle body assembly.
2. Install the bolts.
Tightening torque:
16-20 N.m (1.7-1.9 kgf-m, 12-14 ftdbf}
3. Position the EGRvacuum regulator on the ignition coil and
install the bolt.
Caution
Connect the vacuum hoses to the original position
on the EGR vacuum regulator.
Tightening torque:
8-1 2 N-m (0.8-1 .I kgf-m, 6-44 ft-lbf}
4. Connect the harness connector
and
the high-tension
leads.
Whenever a high tension lead is removed for any
reason from a spark plug or ignition coil, or a new
:
M G l l o 4 - A
lead is installed, apply a silicone dielectric com-
pound to the lead boot prior to installation.
5BUOGX-033