21. Install the DPFE sensor to the engine lifting bracket.
22. Connect the fuel charging wiring harness to the engine
wiring harness.
23.
Install the accelerator cable bracket to the upper intake
manifold.
Tightening torque:
21-28
N-m (2.1-2.8
kgfem, 16-21
ft-lbf)
24. Connect the accelerator cable to the throttle body.
25. Install the generator bracket.
I
MB1333-A
Tightening torque:
44-54
N
.
m (4.4--5.5 kgf
-
m, 3 2 4 0 ft
-
lbf)
26. Install the water pump inlet tube to the generator bracket
and water pump.
Tightening torque:
9-
2 N-m (92-1 22 kgf-cm, 80-1 06 in-lbf)