Output Control Test - Mazda B-Series 1997 Workshop Manual

ON-BOARD DIAGNOSIS SYSTEM
K
( 7
4. Select diagnostic data link.
DIAGNOSTIC DATA LINK
VlEW RECORDER AREAS
DIGITAL MEASUREMENT
GENERIC OBD II FUNCTIONS
L
I
MF1686-A
5. Select diagnostic test mode.
6. Select RetrieveIClear continuous DTCs.
7. Turn key ON. Press start and trigger.
8. Follow operating instructions from the menu.
PID DATA MONITOR AND RECORD
ACTIVE COMMAND MODES
SELECT ITEM AND PRESS TRIGGER TO START
I
MF1692-B 7BUOKX-296
Output Control Test
DIAGNOSTIC DATA LINK
VlEW RECORDER AREAS
DIGITAL MEASUREMENT
GENERIC OBD II FUNCTIONS
Note
For 5R55E diagnosis and testing, refer to Electrical
System Components in this section.
Procedure
Note
Start engine and bring up to operating temperature
before running Output Control Test.
1.
Perform the necessary vehicle preparation and visual
inspection. (Refer to Section FT). Hook up SST (NGS) to
vehicle.
2. Select vehicle and engine selections.
3. Select vehicle year and model.
4.
Select diagnostic data link.