Interlock Pins Installation; 3Rd/4Th Shift Rods Installation - Mazda B-Series 1997 Workshop Manual

J1
TRANSMISSION
BACK-UP
LIGHT
PAR WNEUTRAL
POSITION
SWITCH
,
SWITCH
LARGE
INTERLOCK
PIN
/
I
\
PIN
5THl
'
3RDl4TH 1 STl2ND
REVERSE
SPRING SPRING
SPRING AND AND
AND DETENT DETENT
DETENT BALL BALL
BALL
Assembly Note
Sthlreverse cam lockout plate
Install the 5thlreverse cam lockout plate and bolts.
Tightening torque:
8-10 N-m (0.8-0.9
kgf-m, 6-7
ft-lbf)
Interlock pins
Install the large and small pins in their original positions.
3rd14th shift rods
1.
Position the shift rod into the control case.
2. Position the detent ball and spring into the control case
spring seats.
3. Compress the detent ball and spring assembly and push
the shift rod into position over the detent ball.
4. Engage the 3rd14th shift fork with the shift rod.
5. Position the friction device and spring into the control case
spring seats.
6. Compress the friction device and spring assembly and
push the shift rod into position over the friction device.
7. lnstall the 3rdl4th shift gate.
8. lnstall the 3rdl4th shift fork spring interlock pins.
4BUOJ1-038