Camshaft Pulley; Timing Belt Tensioner Installation; Timing Belt Outer Cover Installation; Crankshaft Pulley Installation - Mazda B-Series 1997 Workshop Manual

ASSEMBLY
CAM AND AUXILIARY
SHAFT SPROCKET TOOL
T74P-6256-6
SPRING BOLT
ADJUSTMENT
'
BOLT
Assembly note
Camshaft pulley
1. Position key and the camshaft pulley on the camshaft.
2.lnstall Cam and Auxiliary Shaft Sprocket Tool
T74P-6256-B or equivalent, without the threaded puller
insert, on the pulley.
3. lnstall the washer and the camshaft pulley bolt to hold the
gear.
Tightening torque:
70-95 N-m (7.2-9.6 kgfem, 52-70 ft-lbf)
5BUOB1-073
Timing belt tensioner
1. lnstall the timing belt tensioner.
2. lnstall the tirning belt tensioner adjustment bolt and
spring bolt.
Tightening torque:
Adjustment bolt: 35-45 N.m (3.5-4.5 kgf-m,
25-33 ftelbf)
Spring bolt: 40-55 N-m (4.2-5.5 kgf.m,
3 0 4 0 ftellbf)
I 2
MB1003-A 5BUOB1-098
Timing belt outer cover
lnstall the timing belt outer cover.
Tightening torque:
8-12 N-m (0.8-1.1 kgf.m,
6 - 8
ft-lbf)
4BUOB1-144
Crankshaft pulley
lnstall the crankshaft pulley.
Tightening torque:
125-1 65 N.m (1 2.7-1 6.8 kgfm, 92-1 21 ftslbf)
5BUOB1 -074
AUXILIARY PARTS
1. Assemble in the order shown in the figure, referring to Assembly Note.
2. lnstall the dipstick tube and bracket, referring to Assembly Note. (Refer to page B1-66.)
3. Connect the required vacuum hoses.
4. lnstall the two heater hose retaining screws on the cylinder head.
5. Install the air cleaner assembly.