Pilot Bearing; Clutch Disc; Clutch Cover; Clutch Release Cylinder - Mazda B-Series 1997 Workshop Manual

H
CLUTCH UNIT
T71 P-7137-C
PILOT BEARIN
REPLACER
CLUTCH ALIGNE
T71 P-7137-H
Pilot bearing
lnstall a new pilot bearing by using Pilot Bearing Re-
placer T71 P-7137-C and Clutch Aligner T71 P-7137-H,
or equivalents.
Clutch disc
1. Clean the clutch disc splines and main drive gear splines.
2. Apply organic molybdenum sulfide grease to the splines.
3. Hold the clutch disc in position by using Clutch Aligner
T74P-7137-K, or equivalent.
Clutch cover
1. Align the dowel holes with the flywheel dowels and install
the clutch cover.
2. Install Clutch Aligner T74P-7137-K, or equivalent.
3. Tighten the bolts evenly and gradually in the pattern
shown.
Tightening torque:
21-32 N-m (2.0-3.3 kgf.m, 15-24 ft.lbf)
Clutch release cylinder
Install the clutch release cylinder and bolts.
Tightening torque:
17.1-25.9 N-m (1.9-2.6 kgf-m, 14.1-19.1 ft.lbf)
4BUOHX-031