Clutch Housing Installation; Clutch Coil Installation; Assembly - Mazda B-Series 1997 Workshop Manual

ELECTRONIC SHIFT TRANSFER CASE
52
NOTCH
Clutch housing
Install the clutch housing.
Note
The shift shaft should be in the 2H position at final
assembly.
The cavity or notches should be facing the chain
cover.
Raise the 2W-4W shift fork while holding the shift
rail in place. Engage the 2W-4W shift fork bushing
into the shift cam.
Clutch coil
1. Apply sealant to the clutch coil studs and grommet as
shown in the figure.
2. Feed the brown wire through the chain cover.
3. Install the clutch coil assembly into the chain cover.
Tightening torque:
8-11
N-m (0.82-1 .I kgfem,
5.9-4.1
ft.lbf)