Shift Linkage (Manual Shift Transfer Case) Inspection; Shift Linkage (Manual Shift Transfer Case) Adjustment - Mazda B-Series 1997 Workshop Manual

52
SHIFT LINKAGE (MANUAL SHIFT TRANSFER CASE)
C
I
6. Verify engagement in all positions.
SHIFT LINKAGE (MANUAL SHIFT
TRANSFER CASE)
MJ1039-B 5BUOJ2-008
INSPECTION
Verify that the clearance between the shift lever and cam
plate in the 2H front 4H rear and the 4L position is as
specified.
Specification:
Maximum: 3.30mm (0.1 3 in}
4BUOJ2-018
ADJUSTMENT
1. Raise the rubber boot to access the top of the cam plate.
2.
Loosen bolts " A and "B" one turn.
3. Move the shift shaft lever to the 4L position "C".
4. Rotate the cam plate clockwise around bolt "A" until the
shift shaft contacts point "D".
5. While holding the cam plate, tighten bolt " A first then "6".
Tightening torque:
Bolt A: 94--122 N-m (9.6-12.4 kgf.m,
70-90 ft-lbf)
Bolt 6: 43-56 N+m (4.4-5.7 kgf-m,
32-41 ft-lbf}