t
2 .
3 .
lmmobilizer Control Unit-Receiver Replacement
'L
Remove the driver's dashboard lower cover (see
page 20-59).
Remove the steering column covers (see page 17-
Disconnect the 7P connector (A) from the
immobilizer control unit-receiver (B).
5 .
Remove the two screws and the immobilizer
control unit-receiver from the ignition key cylinder
(c).
Install the immobilizer control unit-receiver in the
reverse order of removal.
After replacement, rewrite the unit with a Honda
PGM Tester, then check the immobilizer system.
J
I
6 .
22-167