Position Of The Stopper Plate Solenoid; Position Of The Duplexing Paper Feed Roller Solenoid - Canon 1130 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
6. Assembling the Paper Jogging
Guide Plate Drive Assembly
Keep the paper jogging guide plate closed.
At this time, assemble the parts so that the
rack and the pinion are as shown.
7. Position of the Stopper Plate
Solenoid
1) Keep the steel core [1] of the solenoid
pulled to the solenoid body.
2) Rotate the shutter [2] so that the distance
L1 in the figure is 1.0 ± 0.2 mm; then,
mount the stopper plate solenoid.
8. Position of the Duplexing Paper
Feed Roller Solenoid
With the steel core of the solenoid pulled
to the solenoid body, mount the duplexing
feed roller solenoid so that the distance L2
between the top of the feed roller and the
holding tray is 49 ± 0.5 mm as shown.
7-70
COPYRIGHT © 2002 CANON INC.
[2]
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 7-760
[L1]
[1]
Figure 7-761
[L2]
Figure 7-762