CHAPTER 7 PICK-UP / FEEDING SYSTEM
H. Duplexing Delivery
Assembly
(CLC1150/1180
1. Removing the Duplexing Delivery
Assembly
1) Remove the left upper cover and the left
lower cover.
2) Remove the delivery cover.
3) Remove the nine screws [1], and
disconnect the two connectors [2].
4) Slide out the delivery unit slowly to detach.
2. Position of the Delivery Assembly
Paper Deflecting Plate Drive
Solenoid (SL10)
1) Remove the delivery assembly.
2) Place the delivery assembly on its end on
a level surface.
3) Loosen the adjusting screw [4] to make
adjustments while keeping the paper
deflecting plate [2] butted against the
delivery upper guide [3] when the
solenoid [1] is on while viewing from the
rear of the delivery assembly.
7-102
COPYRIGHT © 2002 CANON INC.
only)
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[1]
[2]
Figure 7-876
[2]
Figure 7-877
[1]
[1]
[4]
[3]