Canon 1130 Service Manual page 119

CHAPTER 3 EXPOSURE SYSTEM
17) Secure the metal fixing [12] of the scanner
cable to the No. 1 mirror mount with two
screws [13] through the angle hole in the
side plate.
18) Detach the mirror positioning tool.
19) When all work is done, move the No. 1
mirror mount by hand (as if to make about
10 A3 full scans), thereby adapting the
cable to the pulley and the hooks.
Then, fully tighten the four screws [8] that
have been kept loose.
3-16
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[12] [13]
Figure 3-418
[12] [13]
Figure 3-419