J. HVT PCB
1. Removing the HVT PCB
1) Remove the rear cover.
2) Disconnect all eight connectors.
3) Remove the four screws [1], and detach
the HVT-DC PCB [2].
4) Disconnect all connectors.
5) Remove the three connectors [3], and
detach the HVT-AC PCB [4].
K. Developing Bias PCB
1. Removing the Developing Bias
PCB
1) Remove the delivery assembly.
2) Disconnect the four connectors [1], and
remove the two screws [2]; then, detach
the developing bias PCB [3] together with
the PCB case.
COPYRIGHT © 2002 CANON INC.
CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
CANON CLC1100/1130/1150/1160/1180 REV.0 JAN. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[1]
[2]
Figure 9-739
[3]
[3]
[4]
Figure 9-740
[1]
[2]
Figure 9-741
[1]
[1]
[3]
[3]
[2]
9-35