Paper Width Basic Value - Canon 1130 Service Manual

If a transparency is detected while the copier is not in transparency mode (not
selected on the control panel), the transparency is likely to jam.

4. Paper Width Basic Value

If you have replaced the paper width detecting volume or initialized the RAM, you need to
enter the paper width basic values for STMTR and A4R in service mode:
ADJUST>CST-ADJ>C2-STMTR
Use it to change the paper width basic value for STMTR for cassette 2.
ADJUST>CST-ADJ>C2-A4R
Use it to change the paper width basic value for A4R for cassette 2.
ADJUST>CST-ADJ>C3-STMTR
Use it to change the paper width basic value for STMTR for cassette 3.
ADJUST>CST-ADJ>C3-A4R
Use it to change the paper width basic value for A4R for cassette 3.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
7-13