Canon 1130 Service Manual page 801

CHAPTER 13 TROUBLESHOOTING
Although the CLC1100/1140/1160/1180 also indicates this mode item, its
selection is not valid for the model.
REF.
Projector
Level 3
CHANGER presence/absence of the auto changer
TRAY presence/absence of the slide tray
T-KIND type of tray
T-SET presence/absence of slides
T-MOVE state of the tray
T-M-ERR tray movement error
T-HP-ERR tray HP error
T-L-MOVE tray local movement
T-POS position of the tray
L-MOVE lens movement
M-EXCT state of motor excitation
L-POS position of the lens
LAMP-ERR open circuit in the lamp
INITIAL initialization
LOCAL local movement
R/L remote/local
Editor
Level 3
ED-X input coordinates in editor sub scanning direction (X)
ED-Y input coordinates in editor main scanning direction
(Y)
13-214
COPYRIGHT © 2002 CANON INC.
Description
Description
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
PRJ>DISPLAY
Remarks
0: absent, 1: present
0: absent, 1: present
0: 80, 1: 140
0: absent, 1: present
0: stationary, 1: moving
0: normal, 1: error
0: normal, 1: error
0: stationary, 1: moving
0: HP, 1: not HP
1: stationary, 1: moving
0: normal, 1: excited
0: HP, 1: not HP
0: normal, 1: open circuit
0: normal, 1: being initialized
0: normal, 1: moving
0: remote, 1: local
EDITOR>DISPLAY
Remarks
Not indicated if
EDITOR>OPTION>
ED-MODE is set to '0'.