Paper Deck - Canon 1130 Service Manual

CHAPTER 12 MAINTENANCE AND SERVICING
Note:
1) If you clean the black toner concentration sensor and the gradation sensor (CLC1140/
1160/1180 only), use a flannel cloth, moistened with and then well wrung.
The reason 1for using water is to remove charges from the sensor window. (The presence
of charges can attract toner to the sensor window)
After cleaning the sensor window with water, do NOT leave droplets of water on it, also
do NOT dry wipe it.
2) If you have cleaned the sensor, be sure to execute the following in service mode:
• For the black toner concentration sensor, FUNCTION>INSTALL>INIT-D.
• For pre-cleaning sensor, FUNCTION>SENS-ADJ>CLN-OFST.
B. Paper Deck
Clean
Unit
Pickup Feed roller, roll
assembly
12-10 12-8
COPYRIGHT © 2002 CANON INC.
Replace Lubricate
Part
CANON CLC1100/1130/1150/1160/1180 REV.3 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Adjust Inspect
Intervals
every every every
250,000
25,000 40,000
As of January 2002
Remarks