Canon 1130 Service Manual page 526

6) Remove the two screws [2] (for the metal
fixing on the bottom of the oil tank).
7) Remove the screw [3], and detach the oil
tank fixing plate [4].
8) Pick the hook with your fingers, and
detach the oil level sensor [5].
9) Remove the hose [6]. (At this time, oil will
drop. Be sure to use a paper rag or the like.)
10) Lift the fixing unit, and remove the oil
tank.
11) Empty the oil tank of silicone oil.
12) Put back the parts by performing steps 5)
through 11) in reverse.
13) Loosen the screw [7], and unlock the
cleaning blade releasing lever [8] slowly;
while holding it in place, tighten the screw.
14) Mount the transfer drum stopper using a
screw.
15) Tape the releasing lever of the transfer
drum in place.
16) Tape the front cover, delivery assembly,
and pickup assembly in place.
17) Place A3 paper on the copyboard glass,
and tape the copyboard cover (or the
RDF) in place.
18) Turn the adjuster so that it will not
interfere with transportation.
Be sure to orient the copier
so that it is moved in the
direction of paper delivery.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
[6]
[5]
[3]
Figure 11-302
[8]
Un-
locked
Figure 11-303
Figure 11-304
[4]
[2]
[7]
Locked
11-29