Canon 1130 Service Manual page 174

E061
E061 is an error code associated with the mechanism controlling the surface
potential of the drum, and points to the following:
(The notation "xx" of detail code indicates the color of the developing
assembly; e.g., xx=01: M, xx=02: Y, xx=03: Y, xx=04: Bk.)
Check
Potential
sensor
Pre-
exposure
lamp
Primary
charging
assembly
Post-
cleaning
charging
assembly
Laser
COPYRIGHT © 2002 CANON INC.
Detail
code
0000 The offset value is other than
100 ±50.
0001 Vd/VL before offset is 10 V or
less.
0010 VL5 is 100 V or more.
0020 Vd1/Vd2/VdI is 30 V or less.
0030 The Vd1/Vd2/VdI is 100 V or
less.
0031 Vd1/Vd2/VdI is 900 V or more.
0032 The difference between Vd1 and
Vd2 is 100 V or less.
0040 Vd5 is 100 V or less.
0050 The difference between Vd1 and
VL1 is 30 V or less and, in
addition,Vd1 is 350 or more,
or The difference between Vd2
and VL2 is 30 V or less and, in
addition, Vd2 is 550 V or more.
0051 Vd1 is 300 V or less, and Vd2 is
500 V or less.
0052 VL1 is 200 V or more, and VL2
is 250 V or more.
0053 Vd1 is 100V or less, and Vd2 is
150V or less.
CANON CLC1100/1130/1150/1160/1180 REV.3 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
Description Possible cause
The potential sensor is
faulty.
The pre-exposure lamp is out
of order.
The primary high-voltage
output is faulty, or the charge
wire is broken.
The grid bias has not been
generated.
The grid bias control
mechanism is faulty.
The grid bias output is
faulty.
The post-cleaning charging
output is faulty.
The laser fails to turn on, the
guiding mirror is faulty, or
the laser shutter is faulty.
The laser is faulty.
The laser fails to turn on, the
guiding mirror is faulty, or
the laser shutter is faulty.
The laser is faulty.
6-15