Canon 1130 Service Manual page 523

CHAPTER 11 INSTALLATION
3) Holding the grip of the side guide plate,
move the side guide plate up to the
appropriate side index.
4) Mount the cover of the side guide plate.
(You need not perform this step in the
case of the universal cassette.)
5) Remove the screw of the rear guide plate,
and relocate the rear guide plate to the
appropriate size index. (In the case of the
universal cassette, slide the rear end guide
plate to the appropriate size index.)
If the paper is A3 or 11x17, orient and
mount the rear guide plate as shown. (In the
case of the universal cassette, hold the grip
of the rear end guide plate, and slide it fully
to the left, and then shift the grip to the
right.)
11-26
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 JAN. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
Grip
Figure 11-233
A3/11x17
Rear end guide plate
Screw
Figure 11-234
Side guide plate
Cover