8) After making sure that there is no gap,
start attaching both ends of the sheet to the
transfer drum.
At this time, try using both thumbs as
shown, moving them as if to rub the sheet
in axial direction. (Do not move the
thumbs in peripheral direction, which can
cause parts of the sheet to lift.)
9) Remove the backing paper from the
trailing edge of the transfer drum sheet.
10) Without pulling the transfer drum sheet,
lightly press along the middle of the
double-sided tape, along the trailing edge
of the sheet in sequence: [1], [2], and [3].
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.0 DEC. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
Figure 7-849
Figure 7-850
Figure 7-851
[3]
[1]
[2]
7-92a
7-93