CHAPTER 7 PICK-UP / FEEDING SYSTEM
4) Remove the three screws [5], and detach
the attraction roller drive gear unit [6].
5) Remove the roller pressure spring (rear)
[7].
6) Remove the E-ring [9] and spring [10] of
the registration roller upper [8]; then,
remove the bushing [11].
7-82
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[6]
[5]
[5]
Figure 7-823
[7]
Figure 7-824
[11]
[10]
[9]
Figure 7-825
[8]