Canon 1130 Service Manual page 854

Level 3
SIGG-K Use it to adjust the gain for the Bk toner
(Note 1) concentration reference signal during ATR control.
D-SGNL-Y Use it to adjust the signal value (during
D-SGNL-M initialization) for the toner concentration sensor of
D-SGNL-C each color in relation to light reflected by the
D-SGNL-K photosensitive drum.
D-SGNL-4 Use it to adjust the signal value (during
(Note 1) initialization) for the toner concentration sensor of
all colors in relation to light reflected by the
photosensitive drum.
P-REF-Y Use it to adjust the toner concentration reference
P-REF-M signal value for each color on the photosensitive
P-REF-C drum during INIT for ATR control.
P-REF-K
(Note 1)
P-SGNL-Y Use it to adjust the toner concentration reference
P-SGNL-M signal value for each color on the photosensitive
P-SGNL-C drum during INIT for ATR control.
P-SGNL-K
(Note 1)
SIGG-P-Y correction of the patch gain for ATR control when
SIGG-P-M INIT-x (mono INIT) is executed
SIGG-P-C
SIGG-P-K
(Note 1)
RGAN-P-Y correction of the patch gain for toner density control
RGAN-P-M when INIT-x (mono INIT) is executed
RGAN-P-C
RGAN-P-K
(Note 1)
P-SENS-Y Initial setting reference signal level of gradation
P-SENS-M sensor (PS73) when P-SENS is executed
P-SENS-C
P-SENS-K
(CLC1140/
1160/1180
only)
(Note 1)
PS-ADJ-Y Adjustment settings used for offset executed in
PS-ADJ-M relation to the initial settings of the patch data
PS-ADJ-C prepared for each color.
PS-ADJ-K
(CLC1140/
1160/1180
only) (Note 1)
Note 1: Execute this mode upon replacement of a CPU PCB or initialization of the RAM. The settings
will be returned to standard settings, requiring you to enter the appropriate settings. Be sure to
record any new settings on the service label.
COPYRIGHT © 2002 CANON INC.
Description
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Remarks
0 to 255
0 to 1023
0 to 1023
0 to 1023
Effective range
P-SGNL-Y,M,C:
684 to 748
(CLC1100/1120/1130/1150)
656 to 748 (the other)
P-SGNL-K :
306 to 371
(CLC1100/1120/1130/1150)
306 to 399 (the other)
0 to 255
0 to 255
0 to 2000
(Effective range: 257 to 799)
Outside the range, an error
will be indicated.
-32 to +32
(default: 0)
13-265