Canon 1130 Service Manual page 852

CCD
Adjusts the CCD
Level 3
EC-B For future expansion.
EC-G
EC-R
LASER
Adjusts the laser system.
Level 3
T-V00 Use it to enter the laser control initial value at V00
for text mode (800 lines) as upon replacement of the
laser unit.
T-VFF Use it to enter the laser control initial value at VFF
for text mode (800 lines) as upon replacement of the
laser unit.
P3-V00 Use it to enter the laser control initial value at V00
for photo mode (400 lines) as upon replacement of
the laser unit.
P3-VFF-1 Use it to enter the laser control initial value at VFF
(45%) for photo mode (400 lines) as upon
replacement of the laser unit.
P3-VFF-2 Use it to enter the laser control initial value at VFF
(55%) for photo mode (400 lines) as upon
replacement of the laser unit.
P3-VFF-3 Use it to enter the laser control initial value at VFF
(65%) for photo mode (400 lines) as upon
replacement of the laser unit.
P3-VFF-4 Use it to enter the laser control initial value at VFF
(70%) for photo mode (400 lines) as upon
replacement of the laser unit.
POWER Use it to turn on the laser output when adjusting the
laser power.
T-V00-ON Use it to turn on the laser output when checking T-
V00.
T-VFF-ON Use it to turn on the laser output when checking T-
VFF.
P3V00-ON Use it to turn on the laser output when checking P3-
V00.
P3-V1-ON Use it to turn on the laser output when checking P3-
VFF-1.
P3-V2-ON Use it to turn on the laser output when checking P3-
VFF-2.
P3-V3-ON Use it to turn on the laser output when checking P3-
VFF-3.
P3-V4-ON Use it to turn on the laser output when checking P3-
VFF-4.
Note 1: Execute this mode upon replacement of a CPU PCB or initialization of the RAM. The settings
will be returned to standard settings, requiring you to enter the appropriate settings. Be sure to
record any new settings on the service label.
COPYRIGHT © 2002 CANON INC.
Description
Description
CANON CLC1100/1130/1150/1160/1180 REV.1 JAN. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
COPIER>ADJUST
Remarks
Remarks
0 to 255
Press the OK key to start and
the Stop key to stop.
13-263