Canon 1130 Service Manual page 5

This Service Manual contains basic data and figures on the plain paper
1120/1130/1140/1150/1160/1180
is designed to enable fully automated copying work, and may be configured with the
following options:
1. RDF-E2/E3
2. Stapler Sorter-F1
3. Film Projector-D1
4. CLC Paper Deck-E1
For the RDF-E2/E3, Stapler Sorter-F1, and Film Projector-D1, see their respective
Service Manuals for details. This Service Manual covers the copier itself, and consists of
the following chapters:
This manual omits descriptions on technologies used in common with existing
machines. Refer to the Copier Basic Series as necessary for additional information.
Chapter 1 General Description introduces the copier's features and specifications,
shows how to operate the printer unit, and explains how copies are made.
Chapter 2 Basic Operation provides outlines of the steps used to generate copies.
Chapter 3 Exposure System discusses the principles of operation used for the
mechanical/electrical operations of the copier's exposure system. It also
explains the timing at which the various units involved are operated, and
shows how they may be disassembled/assembled and adjusted.
Chapter 4 Image Processing System discusses the principles of operation used for
the mechanical/electrical operations of the copier's image processing
system. It also explains the timing at which the various units involved are
operated, and shows how they may be disassembled/assembled and
adjusted.
Chapter 5 Laser Exposure System discusses the principles of operation used for the
mechanical/electrical operations of the copier's laser exposure system. It
also explains the timing at which the various units involved are operated,
and shows how they may be disassembled/assembled and adjusted.
Chapter 6 Image Formation System discusses the principles of how images are
formed. It also explains the timing at which the various units involved in
image formation are operated, and shows how they may be disassembled/
assembled and adjusted.
Chapter 7 Pick-Up/Feeding System discusses the principles of how the printer unit
picks up and moves paper inside it. It also explains the timing at which the
various units involved are operated, and shows how they may be
disassembled/assembled and adjusted.
Chapter 8 Fixing System discusses the principles of how the printer unit fuses toner
images to paper. It also explains the timing at which the various units
involved are operated, and shows how they may be disassembled/
assembled and adjusted.
COPYRIGHT © 2002 CANON INC.
INTRODUCTION
needed to service the machine in the field. The copier
CANON CLC1100/1130/1150/1160/1180 REV.3 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CLC1100/
i