Canon 1130 Service Manual page 521

CHAPTER 11 INSTALLATION
6) Slide the cassette into the copier.
7) Press the key.
8) Press 'adjust/clean'.
9) Press the
correction), and perform the instructions
on the control panel to execute auto
gradation correction.
Before generating test
prints, be sure that paper of
B4 or larger is set.
10) Set a test sheet on the copyboard, and
check the images produced by trying all
cassettes as the source of paper. (In the
case of the CLC1150/1180, try the
duplexing tray also.)
• Make sure no abnormal
• Check the copy images
• Check to be sure that as
• If the copy images are
11-24
COPYRIGHT © 2002 CANON INC.
key (auto gradation
noise is heard.
made at each default
reproduction ratio.
many copies as set are
made normally.
not normal, make
adjustments
performing the Image
Adjustment Basic
Procedure.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
by