Scheduled Servicing List; Copier - Canon 1130 Service Manual

IV. SCHEDULED SERVICING LIST
A. Copier
Do not use solvents or oils other than those listed.
Clean
Unit
Externals and Copyboard glass
controls Copyboard cover
Ozone filter
Air filter
Toner filter
Original Original reflecting cover
exposure No. 1 through No. 3 mirrors,
Lens Scanner rail
Pickup/ Attraction, registration
feeding spring clutch
Attraction roller
Attraction roller cleaner pan
Registration roller
Pre-registration roller 2
Pre-registration roller 1
Registration path middle guide
Pickup vertical path roller
Transfer drum Transfer drum cleaner
Jam sensor (PS6) metal plate
(resin tape used for No.2
static eliminator mount)
Jam sensor (PS5) metal plate
(polishing roller motor
mounting plate)
Laser exposure Dust-proofing glass
Charging Shielding plate, block
COPYRIGHT © 2002 CANON INC.
Replace Lubricate
Part
CANON CLC1100/1130/1150/1160/1180 REV.3 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 12 MAINTENANCE AND SERVICING
Adjust Inspect
Intervals
every every every
20,000
25,000 40,000
As of January 2002
Remarks
every
50,000
Use alcohol.
Or, 1 yr.
Or, 1 yr.
Or, 1 yr.
Use blower brush.
After cleaning, apply
silicone oil.
Use lubricant.
Remove unit, and clean.
Remove unit, and clean.
Remove unit, and clean.
every 250,000
Remove unit, and clean.
Clean every 250,000
Clean the guide surface.
every 250,000
Clean every 250,000
Apply lubricant to the
busihg of the brush.
Clean with lint-free paper;
then, clean with alcohol.
Be sure the part is
completely dry before
mounting.
Do not use water.
For post-cleaning charging
assembly, clean every
20,000 copies.
12-7