CHAPTER 7 PICK-UP / FEEDING SYSTEM
7) Remove the two screws [11], and detach
the lower paper guide plate [12].
8) Remove the separation roller [13].
The separation roller is se-
cured in position to the
shaft with parallel pin.
Take good care not to drop
the pin when removing or
mounting it.
a. Mount the pickup roller
REF.
b. Mount the feed roller
c. Mount the separation
7-62
COPYRIGHT © 2002 CANON INC.
[1] so that the round
marking is at the rear.
[2] so that the round
marking is at the rear.
roller [3] so that the
round marking is at the
rear.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[12]
[11]
Figure 7-735
[13]
Figure 7-736
[2]
[1]
Figure 7-737
[3]