10) Click 'OK' so that the SST communicates with the machine to obtain necessary data.
11) When the communication ends, the information on the firmware obtained from the machine
will be indicated. Click 'OK' to bring up the Job Selection screen.
12) On the Job Selection screen, click the appropriate button.
COPYRIGHT © 2002 CANON INC.
CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
Figure 9-211
Figure 9-212
CANON CLC1100/1130/1150/1160/1180 REV.0 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
9-2i