Removing The Polishing Roller Unit - Canon 1130 Service Manual

10. Removing the Polishing Roller Unit

1) Remove the transfer drum from the
transfer drum frame.
2) To protect the transfer sheet from
scratches, place the transfer drum unit on
a fault place.
3) Remove the screw [1], and push down the
polishing roller locking lever [2] once;
then, turn it clockwise to free the lock.
The four pins [3] used to
keep the spring from turn-
ing will slip off when the
lock is freed. Take care not
to lose these pins.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
Figure 7-858
Figure 7-859
[3]
[3]
Figure 7-860
[2]
[1]
[3]
[3]
7-95