Canon 1130 Service Manual page 592

b. Attaching the Transfer Drum Sheet
Do not touch the area on
the transfer drum sheet
where copy paper will be
attracted.
1) Shift the locking lever of the transfer
blade and the attraction brush in
clockwise direction to release them.
2) Clean the area where double-sided tape is
attached on the transfer drum ring with
alcohol.
3) Turn the ring so that the ring linking plate
[1] is positioned as shown.
4) Remove the double-sided tape from the
leading edge (where holes are found) of
the transfer drum sheet.
5) By referring to the long hole in the left
side of the linking plate and the long hole
on the left side of the sheet, attach the
transfer drum sheet so that it is horizontal
while observing the following:
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Figure 13-239
Figure 13-240
Figure 13-241
[1]
13-25