Canon 1130 Service Manual page 221

CHAPTER 6 IMAGE FORMATION SYSTEM
Hold it as shown for
removal,
REF.
facilitating the work.
21) Place the photosensitive drum unit so that
the protrusion on the flange at the rear is at
the bottom (i.e., the drum heater friction
plate is at the bottom).
The photosensitive drum is
susceptible to light, and
exposure to light for a long
time can lead to white spots
or black bands on copies.
Whenever
removed the photosensitive
drum from the copier, wrap
it with the light-blocking
sheet (or five to six sheets
of fresh paper), and keep it
in a dark place.
If the photosensitive drum
is exposed to light of 600
REF.
lux for 1 min and is kept in
a dark place for 24 hr
thereafter, it may recover
to more or less normal
condition (not affecting
actual
Nevertheless, take care not
to subject it to direct
sunlight. (Rays of the sun
typically are 10000 to
30000 lux.)
6-56
COPYRIGHT © 2002 CANON INC.
thereby
you have
copies).
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 6-613
Figure 6-614