Canon 1130 Service Manual page 117

CHAPTER 3 EXPOSURE SYSTEM
13) Engage the scanner cable on the pulley
and hooks as shown.
· Take care not to damage
the cable by the edge of
the metal plate.
· Keep the four screws [8]
loose during the work.
14) Remove the screw [7] fitted in step 12).
(both front and rear)
15) Loosen the screw on the mirror
positioning tool (FY9-3040), and extend
the arm [9] fully.
3-14
COPYRIGHT © 2002 CANON INC.
2
[8]
6
Figure 3-414
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
4
[8]
[9]
Figure 3-415
1
3
5,8