Canon 1130 Service Manual page 219

CHAPTER 6 IMAGE FORMATION SYSTEM
14) Place the photosensitive drum unit as
shown.
15) Place paper over the photosensitive drum
as shown.
16) Remove the screw [10], and remove the
fixing pin unit (right) [11].
17) Remove the three screws [12], and
remove the photosensitive drum butting
block (front) [13].
6-54
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 6-607
[10] [11]
Figure 6-608
[13]
[12]
Figure 6-609