Pickup/Feeding System - Canon 1130 Service Manual

CHAPTER 13 TROUBLESHOOTING
D. Pickup/Feeding System
Orientation of the Cassette
1
Pickup Roller
When mounting the pickup roller [1] to
the pickup assembly, be sure that the round
marking [2] on the rubber portion is at the
copier's front. The pickup roller is identified
by color as follows:
• for the front, use the gold-colored roller.
• for the rear, use the silver-colored roller.
Orientation of the Cassette
2
Feed Roller
When mounting the feed roller [1] to the
pickup assembly, be sure that the gear [2] of
the feed roller is at the copier's front.
Orientation of the Cassette
3
Separation Roller
When mounting the separation roller [1]
to the pickup assembly, be sure that the round
marking [2] is at the copier's front.
13-20
COPYRIGHT © 2002 CANON INC.
[1]
CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
Figure 13-225
[2]
[1]
Figure 13-226
[1]
Figure 13-227
[2]
[2]