Removing The Separation Push-Up Roll; Transfer Drum Locking Motor Assembly (Pm5); Transfer Drum Cleaner Locking; Motor Assembly (Pm6) - Canon 1130 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
14. Removing the Separation Push-Up
Roll
1) Remove the transfer drum from the
transfer drum frame.
2) Peel off the transfer sheet.
3) Remove the separation push-up roll [1].
E. Transfer Drum Locking
Motor Assembly (PM5)
1) Slide out the transfer drum frame.
2) Remove the rear cover.
3) Open the CPU PCB.
4) Remove the two screws [1], and
disconnect the two connectors [2]; then,
detach the transfer drum locking motor
assembly.
7-100
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
Figure 7-872
[2] [1]
[1] [2]
Figure 7-873