Making Connections - Canon 1130 Service Manual

C. Making Connections
1) Turn off the machine and the PC.
2) Open the front cover of the machine; then, remove the screw, and disconnect the connector
cover. Switch the mode switch to 'LOAD'.
Switch
COPY
3) Connect the PC to the machine using a parallel cable.
4) Turn on the PC.
5) Start up the SST.
6) Click 'To next' on the right of the Main menu.
COPYRIGHT © 2002 CANON INC.
CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
LOAD
Figure 9-207
Figure 9-208
CANON CLC1100/1130/1150/1160/1180 REV.0 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Bi-Centronics connector
9-2g