Position Of The Delivery Flapper Solenoid (Sl3); Position Of The Fixing/Feeding Unit Locking Solenoid (Sl4) - Canon GP605 Service Manual

9.3 Position of the Delivery Flapper Solenoid (SL3)

Adjust the position of the solenoid using the screw [1] so that the drive lever is fully moved
when the solenoid turns on (i.e., the steel core is pulled).
Pushed fully.

9.4 Position of the Fixing/Feeding Unit Locking Solenoid (SL4)

Adjust the position of the solenoid using the screw [1] so that the locking lever sticks out of the
frame by 10.5 ±0.5 mm when the solenoid turns on (steel core is pulled).
COPYRIGHT © 1999 CANON INC.
Figure 13-D212
[1]
Solenoid(SL 4)
Figure 13-D213
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Solenoid (SL 3)
[1]
Locking lever
13-27