Canon 1130 Service Manual page 346

7) Pull out the registration roller [12] as
shown.
The transparency sensor is
located under the portion
of the registration roller;
be sure not to let the roller
in contact with it.
8) Remove the E-ring [13] and the washer
[14]; then, pull off the bushing [15].
9) While holding the pressure releasing lever
[16] in place by hand, shift the rubber roll
shaft [17] to the left (in the direction of the
arrow), and pull it to the front.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
[12]
Figure 7-826
[15]
Figure 7-827
Figure 7-828
[14]
[13]
[17]
[16]
7-83