C. Supplying Fixing Oil - Canon 1130 Service Manual

C. Supplying Fixing Oil

1) Remove the transfer drum knob, and
remove the two screws; then, detach the
transfer unit cover, and remove the fixing
material from within.
2) Remove the screw, and detach the
stopper of the transfer drum. (You will
be using the stopper when relocating the
copier.)
3) Remove the cap from the fixing oil tank.
4) Remove the outside cap and the inside cap
of the fixing oil bottle, and replace them
with the funnel that comes with the oil
bottle.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 JAN. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
Figure 11-210
Screw
Figure 11-211
Funnel
Figure 11-212
Transfer drum knob
Screw
Transfer unit
Screw cover
Stopper
Outside cap
Inside cap
11-9