Removing The Duplexing Unit Pickup Roller - Canon 1130 Service Manual

4) Remove the resin E-ring [5], and detach
the separation roller [6].
a. When attaching the
b. When mounting the
10. Removing the Duplexing Unit
Pickup Roller
1) Remove the duplexing pickup assembly.
2) Remove the screw [1], and detach the
positioning pin [2]; then, detach the paper
guide [3].
COPYRIGHT © 2002 CANON INC.
feed roller [1], be sure
that the round marking
[2] is at the front.
separation roller [3], be
sure that the round
marking [4] is at the
rear.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
[6]
Figure 7-722
[2]
[1]
Figure 7-723
[2]
Figure 7-724
[5]
[2]
[4]
[3]
[4]
[3]
[1]
7-57