Canon 1130 Service Manual page 570

II. STANDARDS AND
ADJUSTMENTS
System
A. Image Adjustment System
B. Exposure System
C. Image Formation System
D. Pickup/Feeding System
E. Fixing System
F. Externals/Controls
G. Paper Deck
COPYRIGHT © 2002 CANON INC.
No
1 Image Margin
2 Checking/Adjusting the Image Margin
1 Routing the Scannning Drive Cable
2 Adjusting the Mirror Position
1 Adjusting the Height of Charging Wires
2 Points to Note about the Photosensitive Drum
3 Adjusting the Postion of the Photosensitive Drum Fixing
Shaft
4 Use of Grease
5 Adusting the Developing Assembly S-B Gap
6 Replacing the Developer
7 Points to Note about the Gradation Sensor
8 Points to Note about the Pre-Cleaning Sensor
9 Points to Note about the Black Toner Concentration
Sensor
1 Orientation of the Cassette Pickup Roller
2 Orientation of the Cassette Feed Roller
3 Orientation of the Cassette Separation Roller
4 Adjusting the Pressure of the Separation Roller
5 Orientation of the Duplexing Feed Roller and the
Duplexing Separation Roller
6 Orientation of the Manual Pickup, Feed, and Separation
Rollers
7 Attaching the Timing Belt for the Multifeeder Assembly
8 Adjusting the Postion of the Duplexing Unit Paper
Jogging Guide Sensor
9 Position of the Duplexing Unit Stopper Plate Solenoid
10 Position of the Duplexing Feed Roller Solenoid
11 Replacing the Transfer Drum Sheet
12 When Replacing the Transfer Drum Assembly
13 Position of the Paper Deflecting Plate Solenoid (SL10;
delivery assembly)
14 Applying Lubricant to the Transfer drum Cleaner
1 When Replacing the Fixing Heater
2 Adjusting the Nip (nut for locking the fixing assembly)
3 Orientation of the Cleaning Belt
4 Orientation of the Fixing Upper/Lower Solenoid
5 Points to Note When Replacing the oil Coating Assembly
1 Handing the Flywheel
1 Mounting the Paper Level Indicator
2 Adjusting the Left/Right Registration of the Deck
3 Adjusting the Postion of the Roll
4 Routing the Lifter Cable
5 Orientation of the Deck Pickup Roller
6 Orientation of the Deck Pickup/Feed Roller
7 Adjusting the Deck Separation Roller Pressure
CANON CLC1100/1130/1150/1160/1180 REV.1 JAN. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Item of Standard and Adjustment
13-7