Led And Audio Indications - Datalogic Magellan 9800i Product Reference Manual

Datalogic magellan 9800i sacnner
Hide thumbs Also See for Magellan 9800i:
Table of Contents

Advertisement

LED and Audio Indications

Scanner and Scale LEDs
The Green Good Read indicator bars (see item #2 in
Scale LED (see item #4 in
Table 15. Scanner and Scale LED Indications
INDICATION
Scale at Zero
Scanner Active
(Normal Mode)
Good Read
Indication a
Program Mode
Indication
Sleep Mode Indication
Scanner Disabled a
Field Replaceable Unit
(FRU) Warning (Error
Mode)
FRU Indication
ROM Failure
a.
b.
Product Reference Guide
Figure
LED
Scale (Yellow) LED on steady
a
a
Scanner (Green) LED on steady and dim
Scanner (Green) LED - bright flash
Scanner (Green) LED - Continuous flashing
Scanner (Green) LED flashes slowly 10ms
on, 1990ms off.
Scanner (Green) LED blinks100ms on,
900ms off.
Audible low tone 1 second.
Alternating Scanner/Scale /EAS and
ScaleSentry LEDs flash continuously
Scanner (Green) LED flashes a coded
sequence in concert with the speaker.
Scanner (Green) LED - Continuous flashing
200ms on, 200ms off.
Certain functions of the Green and Yellow LEDs are selectable to be enabled or disabled.
Your scanner may not be programmed to display all indications.
For FRU error 9, the Deactivator LED (tri-color) is off.
Figure
58) is primarily used to show scale status (see
DURATION
b
.
57)indicate scanner status, and the
Table
COMMENT
The scale is at rest and reads zero weight. The
scale is ready to weigh.
The scanner is ready for operation. Scanning is
immediately available.
Indicates a bar code has been read and
decoded.
Indicates the scanner is in Label Programming
Mode. Cycle power (or read an Exit Program-
ming label) to exit Programming Mode.
The scanner has automatically switched off
and the unit has entered Sleep Mode due to
extended inactivity.
Host has disabled scanning.
Serves notice that a fatal FRU failure has been
detected. Consult in this manual for more
details.
Occurs ONLY upon Volume/Tone button push
following a FRU warning. Enables service
technicians to identify FRU failures.
Indicates Boot ROM failure or Program ROM
failure.
15).
391

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents