Enter/Exit Programming Mode
Code 128 Correlation
Enables/disables character correlation for Code 128.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
050101(CR)
Code 128 Correlation = Enable
312
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
050100(CR)
Code 128 Correlation = Disable
Magellan™ 9800i Scanner