Laser Safety; Led Safety - Datalogic STS320 Series Installation Manual

LASER SAFETY

This product conforms to the applicable requirements of IEC 60825-1 and complies with
21 CFR 1040.10 except for deviations pursuant to Laser Notice N° 56, date May 8, 2019.
This product is classified as a Class 2 laser product according to IEC 60825-1 regulations.
CAUTION
Disconnect the power supply when opening the device during maintenance or installa-
tion to avoid exposure to hazardous laser light. The laser beam can be switched on or
off through a software command.
The following warning label content is applied to the laser equipped products indicated
in the General View illustration of this document.
The package includes labels for countries where the warning text in other languages is
mandatory. Put them on the product instead of the English version.

LED SAFETY

For all Datalogic STS320 compatible internal illuminators, LED emission is classified into
Risk Group 1 according to EN 62471:2010.
Use of controls or adjustments or performance of procedures other than
those specified herein may result in exposure to hazardous visible laser
light.
Example Laser Warning Labels
LASER SAFETY
To be applied on each
Matrix 320 ATS-xxx
To be applied on the
mounting bracket
INSTALLATION GUIDE VII